CDQYM - ALLOY 426-CNX
- MSDS: CDQYM
- Manufacturer: WATLOW GORDON
- Product Name: ALLOY 426-CNX
- National Stock Number: 3439-00F053040
Product Identification
Product ID:ALLOY 426-CNX
MSDS Date:05/21/1996
FSC:3439
NIIN:00F053040
MSDS Number: CDQYM
Responsible Party
RICHMOND, IL 60071-5000
US
Emergency Phone: 815-678-2211
Info Phone: 815-678-2211
Preparer: ALAN HAMACKA
Cage: GO650
Contractor
Telephone: 815-678-2211
Cage: GO650
Ingredients
NICKEL (SUSPECTED ANIMAL/HUMAN CARCINOGEN BY IARC GROUP 2B,
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 76%
OSHA PEL 1 MG/CUM
ACGIH TLV: 0.05 MG/CUM IC
COPPER (DUST & MIST), BRONZE POWDER *96-4*
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 23%
OSHA PEL 0.1 MG(CU)/M3 (FUME)
ACGIH TLV: 0.2 MG/M3 (FUME)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:IRRITATION TO THE NOSE, EYES,
THROAT/SKIN. CHRONIC EXPOSURE MAY CAUSE SEVERE LUNG DISEASES, LUNG
FIBROSIS, PNEUMOCONIOSIS/NEUROLOGICAL DAMAGE. SKIN SENSITIVITY MAY
ALSO OCCUR.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:DISCOMFORT, IRRITATION, NAUSEA, TIGHTNESS OF
CHEST, DIZZINESS, WATERING OF EYES, HEADACHES, DIFFICULTY IN
BREATHING, COUGHING, CHEST PAINS.
Medical Cond Aggravated by Exposure:THOSE HAVING PRE-EXISTING
CONDITIONS/OTHER OCCUPATIONAL ILLNESSES BECAUSE OF THE WIDE
VARIATION IN INDIVIDUAL SUSCEPTIBILITES.
First Aid
First Aid:INHALATION: MOVE TO FRESH AIR. SKIN: WASH W/SOAP & WATER.
EYES: IMMEDIATELY WASH W/LARGE AMOUNTS OF WATER, WASH FOR 15 MINS.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:NONFLAMMABLE
Unusual Fire/Explosion Hazard:SPARKS FROM GRINDING/WELDING MAY IGNITE
FLAMMABLE/COMBUSTIBLE MATERIALS.
Handling
Other Precautions:ARC/SPARK GENERATED WHEN WELDING/BURNING COULD BE A
SOURCE OF IGNITION FOR COMBUSTIBLE & FLAMMABLE MATERIALS.
Exposure Controls
Respiratory Protection:REQUIRED WHEN EXPOSED TO LEVELS THAT EXCEED
THOSE ESTABLISHED BY OSHA WHEN GRINDING/WELDING. USE NIOSH APPROVED
RESPIRATORS.
Ventilation:REQUIRED.
Protective Gloves:NIOSH APPROVED
Eye Protection:FACE SHIELDS
Other Protective Equipment:PROTECTIVE CLOTHING WHEN REQUIRED.
Supplemental Safety and Health
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:METAL OXIDES, METAL, DUST/FUMES
Disposal
Waste Disposal Methods:GRINDING PARTICLES/DUSTS/WELDING FUMES/CHEMICAL
CLEANING SOLUTIONS MUST BE DISPOSED OF IN ACCORDANCE W/LOCAL, STATE
& FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.